A professional-quality, healthy lawn can significantly increase the value of a household. Follow these 6 steps to grow a weed-free lawn.

Step 1: Remove Existing Weeds

In most lawns, several weeds are virtually unavoidable. You can pull out weeds and root out all the unwanted plants by your hand or hoe. Yet, your best choice is to use a handheld weeder, especially for a large lawn. You may partially apply an herbicide (like glyphosate). If the weeds are completely out of control, use a “weed-and-feed product” for the whole lawn.

Step 2: Dethatch the Lawn

You might notice so-called thatch somewhere in your lawn. This is the accumulation of organic residues between grass roots and blades. Thatch causes the dead patch in turf, which opens space for weeds to grow. That’s why you should inspect the entire lawn for a 1-inch layer of thatch and remove it. You can remove thatch by means of a power dethatcher or thatching rake. Thereafter, your lawn is likely to look awful, but don’t worry. It will recover in about 3 to 4 weeks.

Step 3: Aerate the Lawn

Check turf for possible problems with compaction. Then dig out a section of the lawn (a square foot will be quite enough) to examine the condition of the roots. You need to aerate the lawn if the roots do not go deeper than two inches. It’s good to water your lawn one day before aeration for the best results. Make sure to go over the entire lawn with a core aerator. At last, apply sand or even better compost over the freshly aerated lawn.

Step 4: Sow Grass on Bare Spots

You should apply cool-season grass seed in early fall or early spring. Use the seeds like fescue or rye. Likewise, apply a warm-season grass seed, such as Zoysia or Bermuda, in early summer. Be sure to use a seed spreader for an even sowing throughout the lawn. Then water the sown area to help the grass start growing.

Step 5: Mow Grass

A weed-free lawn is denser than a neglected one. By the way, a healthy lawn is more resistant to weeds. Too tall grass shades out weed seeds and prevents germinating. But that doesn’t mean you should scalp your lawn. Make sure the grass is approximately 2-1/2 inches tall when setting the height on the mower deck. Also, tend to alternate the mowing pattern each time. Mow grass at a 90- or 45-degree angle from the previous mowing direction. One may ask, what does it matter? That will prevent compaction of soil and make the grass grow upright as well. Find the best weed eaters in this place: https://www.weedeaterscentral.com/.

Another tip: Always keep the blades of your mower razor sharp.

Step 6: Feed and Water Grass

Provide your lawn with adequate moisture, especially in warm periods. For the extensive lawn, you should use several sprayers or an irrigation system. As for the feeding, apply turf fertilizer from time to time by following the manufacturer’s instructions.

You will need to repeat these six simple steps every year. That will make your lawn feel healthy all the time!